Skip to content

wood-frame construction – 3

wood-frame construction – 3

Time limit: 0

Quiz Summary

0 of 6 Questions completed

Questions:

Information

You have already completed the quiz before. Hence you can not start it again.

Quiz is loading…

You must sign in or sign up to start the quiz.

You must first complete the following:

Results

Quiz complete. Results are being recorded.

Results

0 of 6 Questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Categories

Not categorized 0%

Review
Answered
Correct
Incorrect

Question 1 of 6

1. Question

To prevent moisture transfer from the concrete to the wall structure when anchoring it to the foundation, which material does the Code recommend?

Spray polyurethane foam
Correct Incorrect Correct answer

A polyethylene membrane
Correct Incorrect Correct answer

A fiberboard membrane
Correct Incorrect Correct answer

No membrane
Correct Incorrect Correct answer

Correct

Incorrect
Question 2 of 6

2. Question

In a building governed by Part 9 of the Code, what is the minimum length of nails required to fasten a cross-brace (Saint Andrew’s cross) to a joist?

76 mm (3 in.)
Correct Incorrect Correct answer

84 mm (3 ¼ in.)
Correct Incorrect Correct answer

57 mm (2 ¼ in.)
Correct Incorrect Correct answer

105 mm (4 in.)
Correct Incorrect Correct answer

Correct

Incorrect
Question 3 of 6

3. Question

When using traditional floor joists, the Code requires at minimum:

Installation of bridging
Correct Incorrect Correct answer

Installation of continuous strapping
Correct Incorrect Correct answer

Installation of Saint Andrew’s crosses
Correct Incorrect Correct answer

None of the above
Correct Incorrect Correct answer

Correct

Incorrect
Question 4 of 6

4. Question

When installing joists on a beam using hangers, it is necessary to:

Use nails at least 4 in. long
Correct Incorrect Correct answer

Align the top of the joist with the top of the beam
Correct Incorrect Correct answer

Use at least two attachment points for the hanger
Correct Incorrect Correct answer

a) and c)
Correct Incorrect Correct answer

Correct

Incorrect
Question 5 of 6

5. Question

When using 38 × 184 mm (2 × 8 in.) joists, what is the maximum allowable cantilever length?

300 mm (12 in.)
Correct Incorrect Correct answer

400 mm (16 in.)
Correct Incorrect Correct answer

500 mm (20 in.)
Correct Incorrect Correct answer

No limitation
Correct Incorrect Correct answer

Correct

Incorrect
Question 6 of 6

6. Question

When connecting a joist to a steel beam, it is necessary to:

Use splice plates of 19 × 64 mm (1 × 3 in.)
Correct Incorrect Correct answer

Leave a 12 mm (1/2 in.) gap between the splice plate and the beam
Correct Incorrect Correct answer

Use splice plates at least 400 mm (16 in.) long
Correct Incorrect Correct answer

a) and c)
Correct Incorrect Correct answer

Correct

Incorrect