wood-frame construction - 4 - Académie du bâti

What is the first step before installing the floor components?

Pre-assemble the joists

Correct Incorrect Correct answer

Install the beams

Correct Incorrect Correct answer

Install and anchor the sill plate

Correct Incorrect Correct answer

Review the plans

Correct Incorrect Correct answer

What is the maximum allowed spacing between 38 × 89 mm (2 × 4 in.) studs for the exterior walls of a two-story house with an attic roof?

600 mm (24 in.)

Correct Incorrect Correct answer

400 mm (16 in.)

Correct Incorrect Correct answer

300 mm (12 in.)

Correct Incorrect Correct answer

a) and b)

Correct Incorrect Correct answer

What is the sill plate size required by the Code?

89 × 140 mm (4 × 6 in.)

Correct Incorrect Correct answer

38 × 89 mm (2 × 4 in.)

Correct Incorrect Correct answer

19 × 38 mm (1 × 2 in.)

Correct Incorrect Correct answer

38 × 140 mm (2 × 6 in.)

Correct Incorrect Correct answer

To join the double top plates at a wall intersection, you must:

Ensure that the end of each top plate is positioned directly above the studs forming the intersection.

Correct Incorrect Correct answer

Ensure that the joints are positioned directly above the corner posts.

Correct Incorrect Correct answer

Butt them diagonally at each corner. The joints must be aligned on top of each other.

Correct Incorrect Correct answer

Make sure the top plates overlap or are fastened with approved connectors.

Correct Incorrect Correct answer

wood-frame construction – 4